Kangertech EVOD PRO Silver Vape Drive
Kangertech EVOD PRO Black Vape Drive
Kangertech EVOD PRO Red Vape Drive
Kangertech EVOD PRO White Vape Drive
Kangertech EVOD PRO Silver Vape Drive
Kangertech EVOD PRO Black Vape Drive
Kangertech EVOD PRO Red Vape Drive
Kangertech EVOD PRO White Vape Drive

Kangertech Evod Pro Starter Kit

Availability: Out stock

The Kanger Evod Pro Starter Kit is a simple device that’s easy for a new user to get accustomed to. It’s small, convenient, and quite inexpensive.

From $ -

Category: , .

kangertech
RetailerAvailabilityPriceFree delivery 
No data
$
No data
$
No data
$
No data
$
No data
$
No data
$
No data
$
No data

This is Kangertech’s second all-in-one device and it satisfies. The Kangertech Evod Pro Starter Kit uses the Mouth to Lung (MTL) system and features a 4 milliliter tank and an 18650 battery (sold seperately) in a unibody design that combines the two and only measures to be 22mm in diameter. The Evod Pro outputs a 4.2 volt DC when the battery’s capacity is high, but its output will decrease with the battery state. The battery is put in through the bottom with a threaded battery disk. The Micro USB charging port is located beneath the glass and charges at at a maximum of 1A rate.

The tank uses Kangertech CLOCC coils, with optimizations for use between 10 and 24 watts  with the 1.0 NiChrome that is in each set. These coils allow the liquid to just be poured in at the top until the line margin is reached. The tank’s dual 2mm airholes at the top allow efficient Mouth to Lung vaping with flavor. If you need a simple yet effective vape kit that utilizes many features for convenience, the Kangertech Evod Pro Starter Kit is a very good choice, whether you’re a vaping veteran or just getting started.

You will receive the following with the Kangertech Evod Pro Vape Kit:

  • A user manual
  • An Evod Pro system
  • A Micro USB charging cable
  • A Delrin drip tip

Features:

  • 22mm Diameter
  • 4.2V DC output with 0.15 ohm Minimum Atomizer Resistance
  • Bottom Screw Point Battery Access to use with one 18650 Battery (not included)
  • Micro USB Charging Port with a maximum 1A Charge Rate
  • 10 Second Cut-Off
  • Low Battery Protection
  • Short Circuit Protection
  • Over Discharge Protection
  • Single Button UseEvod Pro Tank with 4ml capacity
  • Dual 2mm Airholes on top

Evod Pro Tank with 4ml capacity:

  • Combined with Chassis
  • CLOCC System with 1.0 ohm NiChrome (10 to 24W)
  • Japanese Cotton
  • Vertical Coil Orientation

Top Filling:

  • Pour to Fill
  • Threaded
  • O-Ring Sealed

 

 

Additional Information

Charging Type

Micro USB

Coil Resistance

1.0 ohm

Coil Types

Nichrome (NiCr)

Color

Black, Red, Stainless Steel, White

Device Features

All in one style, Spring Loaded 510, Simple to use

Minimum Resistance VW

0.15 ohm

Device Dimensions (L*W*H)

H – 133mm (excluding drip tip) * D – 22mm

Replaceable Battery

1x 18650

Tank Capacity

4ml

Tank Features

Glass Tank, Top Filling

Weight

111g (exclude 18650 cell)

Reviews

There are no reviews yet.

Be the first to review “Kangertech Evod Pro Starter Kit”