YiHi SXmini X Class Squonk Mod

Description

It is an advanced YiHi SXmini X Class reservoir with innovative ESS auto squonk technology. Automatic ESS squonking calculates frequency accordingly to the wattage you are vaping. Manual squonking allows pumping juice in or out from the atomizer. Mod has a separate eJuice reservoir at the base of the device, which keeps the juice away from the sensitive internal parts. It has an advanced monitoring system that checks the juice level in the atomizer and squonker. It adds or stops the juice supply as needed.

Additionally, it has the SXi-Q control system that allows the user to customize according to his own taste. The taste mode can be adjusted from novice to powerful +.

The box mod is made of zinc-stainless steel alloy and carbon fiber with a TFT-IPS touch screen display. It has a graphic user interface and upgradeable firmware.

Highlights:

Auto Squonker

Has an automatic squonk pump in refillable bottles

Screen

Has a TFT touch screen technology

Battery

Requires dual 18650 batteries to operate

Colors

Available in Kevlar Black and Carbon Fiber

Offers multiple security protection support

Reverse Polarity Protection
Output Short Protection
Low Resistance Protection
Low Battery Voltage Protection
Overheat Protection
Battery Overcharge Protection

YiHi SXmini X Class Squonk Mod Specs and Features:

Board: Contains the YiHi SX650J Chipset
Dimensions: 95.5 mm by 57 mm by 40 mm
Batteries: Dual high-amp 18650 removable batteries (not included)
The wattage output range of 5-200 watts
The voltage output range of 0.7 volt – 8.0 volts (Power Mode)
The voltage output range of 1.0 volt – 8 volts (Joule Mode)
Resistance range of 0.05 ohm – 3.0 ohms (Power Mode)
Resistance range of 0.05 ohm – 3.0 ohms (Joule Mode)
Temperature Range of 212-572°F / 100-300°C
Charging: Type C USB onboard balance charge 5V/2A
Taste Modes: Powerful+, Powerful, Standard, Soft, Eco, SXi-Q-S1-S5, and Novice mode
Zinc-Stainless Steel Alloy and Carbon Fiber Chassis Construction
Temperature control mode: Anti-Dry burning technology
Stainless Steel, Titanium and Nickel Wire Options Supported
ESS Driver Technology – Electronic Spray Squonker
Intelligent Juice Level Monitoring
Intuitive Firing Button
Very responsive TFT-IPS Touch Screen Display 0.69″
SXmini X Class Reservoir
Bottom Hinged Battery Door, spring-loaded
Non-rattle battery door once batteries inserted
Centered spring-loaded 510 Connection
Micro USB Port Type C
Upgradable firmware
Upgradable graphic interface
Available in two colors (Kevlar Black / Carbon fiber)

Inside the box:

1 x SXmini X Class Device
1 x USB-C Cable
2 x Extra E-Liquid Bottle Plugs
1 x User Manual
1 x Warranty Card

Please note that there are several critical recommendations on how to use your vaping device. Please keep safety in mind and use electronic products responsively. The information below is not guaranteed to cover all types of safety issues and is only a guide. For legal advice, you must find or contact a professional source of information confirmed by your local authorities. Be cautious when connecting your device to the electricity source. Keep your device away from extreme temperatures, high or low. Keep your vaping gear away from direct sunlight, water or any other substances that can impact safety when using electronic products. Keep your device away from contact with any kind of metals or electrical conductors such as tools, coins, keys, wire. Do not customize or add modifications to your device by yourself. Old devices and batteries may be unstable. If you notice any malfunctions, stop using a malfunctioning device immediately. We strongly recommend that you recharge replaceable batteries using external chargers. This will help to recharge batteries the right way. If USB charger is the only option to charge, use the supplied charger or a similar one produced by a licensed company. If your mod uses more than one replaceable battery, we recommend using only identical batteries meeting requirements as determined by the equipment manufacturer. Never use any kind of DIY chargers or chargers with visible damage. Never leave the device to charge unattended or overnight. Don’t charge your devices longer than the time specified in the user's manual. Don’t carry your devices and batteries separately in a pocket. Store and carry batteries in an electric-proof container and under safe conditions. Recharge batteries only on a clean and fireproof surface. If a battery looks damaged or has bad wrapping, don’t try to charge it or use it in the device. All batteries must be disposed of in accordance with your local regulations. There is always a risk when using any rechargeable batteries even if not mishandled. VapeDrive.com is providing price information and cannot be held responsible for any damage caused by products found on this website.

1 review for YiHi SXmini X Class Squonk Mod

Rated 5 out of 5

Davon – September 2, 2019

I thought about buying this mod for a long time. looked at the reviews and ordered. There were doubts about the use of the touch screen, but there are no extra taps. The case is very beautiful carbon and steel. charging port type c. tank volume should be larger

Add a review

Additional information

Color	Black Carbon Fiber, Brown
Replaceable Battery	2x 18650
Charging Type	USB type C
Device Dimensions (LWH)	L – 40mm * W – 57mm * H – 95.5mm
Device Features	510 Connection, Child Lock, Color TFT Screen, Customizable Firing Profiles, Cutoff Timer, High Temperature Protection, Overcharge Protection, Short Circuit Protection, Squonker
Maximum Output Wattage	200W
TC Modes	Ni, SS, Ti
Minimum Resistance VW	0.05 ohm
Minimum Resistance TC	0.05 ohm